Begin typing your search above and press return to search. Press Esc to cancel.

Insights from AXPONA 2018 part three

Insights from AXPONA 2018 part three

In commissioning our three-man team to find the best at AXPONA, I expected there to be some overlap. While Chris Martens focused on personal audio, Eric Neff and I concentrated on the halls and floors of a large convention centre on the outskirts of Chicago, and with more than 150 exhibitors, the chances of everyone falling on the same brands was – I had hoped – remote.

I had hoped wrong.

In fact, there was surprising consistency among show-goers. The new products from Audio Research, Gayle Saunders, and Magico were universally praised, and the sound of MBL, Sonner, Prism Sound, Vinnie Rossi, and YG rooms were liked by all. This would make for some very repetitive show reports that would repeat themselves repeatedly! So, my own take on the show took a very different direction and focused on the exciting products that my colleagues might have missed along the way. That is not to say these should be considered as ‘second fiddle’ products, or that in not discussing products like the Audio Research Reference 160 they are somehow diminished.

What follows, however, are my top choices for the ‘watch this space’ products that will come to sit on the shelves of the best dressed audio systems of tomorrow.


Aesthetix evergreen Calyspo line stage and Atlas power amplifier remain extremely popular, but the move toward downshifting and one-box amplifier systems has even reached the high end. The new $7,000 Mimas integrated hybrid amplifier from Aesthetix combines the Calypso and Atlas into one box, with a five-input (balanced and single-ended) preamplifier stage with a discrete switch-resistor volume control, custom-wound transformer power supplies, a ¼” headphone jack, and a 150W per channel power amp with tube gain stage and bipolar output. The zero feedback design can be upgraded with an optional phono stage, DAC, upgraded headphone amp, backlit remote, and even a high-pass crossover for active systems.

Air Tight 

The Japanese amplifier (and cartridge) expert Air Tight has shown early prototypes of its flagship ATE-3011 phono stage before, but never one quite so near completion as at this year’s AXPONA. The infinitely flexible equaliser uses five different curves for both Turnover, and Rolloff, allowing the listener to run through almost every EQ curve ever designed for 33, 45, and even 78rpm disc, as well as custom options. The three input ATE-3011 uses a system of pipes to channel signals without the ingress of vibration. The ATE-3011 will be available from the end of the year, and the ‘Reference Class’ price is still to be determined.

Einstein Audio

The German high-end brand does not add to its product range regularly, but when it does, it’s worth the wait. AXPONA this year saw the a sense of completeness to the line, thanks to the new $12,000 The Record Player. Not simply a platform for the company’s arm and cartridge, The Record Player is a complete belt-driven reference platform for vinyl replay, using the company’s powerful reputation for engineering excellence. Everything right down to a water-cut bamboo subchassis to a clutch mechanism to ensure belt precision even at start-up, was taken into account!

Gershman Acoustics

Gershman’s latest loudspeaker and its current flagship is called ‘Posh’. While it bears few similarities to Victoria Beckham, this Canadian separate box tower is built from inch-thick HDF cabinets, with ¼” thick stainless-steel panels for reinforcement. This builds upon the design brief from the company’s Black Swans model, and features a Morel dome tweeter, an Accuton midrange, and two of Gershman’s own 8” aluminium alloy bass drivers. All for a cool $129,000 per pair! 


Having just reset what is possible from digital audio in its limited ZENith Mk II Special Edition model, the company raised the bar a lot further with the upcoming ZENith Statement (price to be confirmed). A dual case system (with disc ripping, conversion, power supply regulation, and storage in one section, the AC-DC conversion in the other), the Statement features a wholly new USB board, custom OCXO clocks, eight fully independent power supplies, and a motherboard created entirely from scratch (no ‘retasked PC’ here). Played through Audio Research and YG, and compared to the SE, the Statement shows just how much can be had from streamed audio.

Linear Tube Audio 

Linear Tube Audio is continuing to leverage the technology developed by David Berning in its increasing range of amplifiers. Having started with headphone amplifiers, the company now has four models in the line, the latest of which is the ZOTL Ultralinear. This $6,800 flagship stereo amplifier for the brand is based on the 17JN6 tube and – as the name suggests – is the first ultralinear amplifier design without a traditional output transformer. The amplifier is said to deliver somewhere between 15-20W per channel.


Bringing high-end performance to more attainable levels, Parasound has extended its range of John Curl designed amplifier electronics with the addition of the £5,995 Halo JC 5 stereo power amplifier. Designed to squeeze as much of the prized Halo JC 1 mono power amplifier into a single chassis, this hefty solid-state design will pump out a healthy 400W into an eight ohm load, with the first 12W of that in pure Class A and a peak current of a mighty 90A. The JFET input/MOSFET output design is powered by a 1.7kVA shielded toroidal transformer. Given the success of the JC 1 (which has been at the top of the amplifier charts for the last 15 years), expect much from this amplifier when it is launched in June.

Ryan Speakers

The UK often lays claim to ‘owning’ the standmount loudspeaker market, but it hasn’t reckoned with the $4,000 Ryan Speakers S610. The products from the Ryan brothers of California are well known in West Coast audiophile circles but are not available in the UK yet. Which is a bit of a shame, because this front-ported two-way design is ideal for European listeners and delivered a fine performance, when coupled to an Exogal server, DAC, and amplifier combination, fed by a Shunyata Denali and cables.


Ron Sutherland’s new Loco phono stage (expected to cost around $8,800) is so named because it makes some bold – some might say ‘loopy’ – design decisions in order to create a high-performance phono stage. For example, it only supports XLR phono inputs and outputs, and – being a transimpedance design has both no loading options and – because it has a current input and voltage output, can only express its gain in terms of ohms, rather than decibels. It all makes sense in the listening!


VAC is best known for its high-end preamps and power amps, but it also has a small and well-regarded range of integrated amplifiers. The new $10,000 Sigma 170i iQ represents the lowest cost VAC amplifier to date but includes the company’s continuous automatic bias system and can deliver a healthy 85W per channel from its quartet of KT88 power tubes. The line-only integrated amp can also be supplied with an optional phono stage.


Five great sounds

Zesto Audio

Zesto Audio always manages to make a great sound, in part because of good electronics, but also because they know what works. The system, sporting a Merrill Williams Audio REAL 101.3 turntable, a pair of Tri-Planar U2 arms and a Benz stereo or Ortofon mon cartridge, culminating in Marten Django L loudspeakers, with Stillpoints racks and feet, and Fono Acoustica cabling, was a great partner for the Andros Téssera phono stage, the Leto 1.5 preamp, and pair of Eros 300 mono amps from Zesto Audio. AXPONA was the launchpad for the company’s $2,995 Allasso step-up transformer, and while trying to single out a SUT from a wholly new system in a new room is all but impossible, the whole system sang sweetly, so things were working well together.


Bruno Putzey’s $11,500 Kii Three loudspeakers with matching $1,600 Kii Control controller are not exactly new, and the lecture you get before you get to hear the loudspeakers is long, and very, very thorough. But, now I know the name of the soccer team supported by the guy who does the soldering for Kii, I can also tell you he is doing a very good job. This unique digital active loudspeaker design with its intelligent DSP and CAT6 intercommunications makes for a sound that few conventional audio systems (irrespective of size of speaker or bank balance) can match.


There are some systems that work, and there are some that work magic. When I heard the Chord and Raidho room, it was very much the latter. It was also a fine example of putting a system together intelligently, with an SME 15 and Ortofon Black analogue front-end being driven by a Chord Symphonic phono stage, a Blu II transport and DAVE on the digital side, a Chord CPM 3800 integrated amp, a pair of Raidho D-4.1 tower speakers and a lot of Chrod Odin 2. Put simply, there was an operatic aria played, bumps were thoroughly goosed, and there must have been some tear gas involved. 


Conventional wisdom suggests MartinLogan speakers need a big room to come to life. The Continuum/Constellation/MartinLogan room begged to differ. This was a standard sized, not too large bedroom, with the loudspeakers supposedly too close together and too near to the listeners. However, whether it was the company they kept in Continuum’s turntable and arm combination, and a good mix of Constellation’s electronics, the music played (but this wasn’t the first time I’d heard Dean Martin sing that day), or the number of people who stayed in that room for the longest time, but it was doing something very, very right!

Paragon Sight And Sound 

Michigan-based Paragon Sight And Sound represents some of the greatest names in high end audio. In one of its many rooms, the system comprised a full dCS Vivaldi stack, D’Agostino amplification, and Wilson Audio Alexandria XLF towers in a large room. This was the launch of the MQA upgrade to the dCS Vivaldi stack (expect a review of the dCS Rossini MQA upgrade in an upcoming issue), and once again, Wilson Audio’s recording studio in residence Peter McGrath was able to play recordings that he had made in high-resolution PCM and replay them reworked through MQA. And in each case, the MQA version sounded a lot more physically ‘real’. Whatever you think about MQA (and I remain ‘undecided’), this is the most compelling demonstration out there and ends in some serious head-scratching on all parts.

Best In Show

The Best need not be the most expensive. OK so the system came to well over $100,000 but in a world of million-dollar systems, this was fighting above its weight. The fine sounds coming from the Cardas Audio/Doshi/Jeff Rowland/Joseph Audio were varied thanks to extremely catholic musical tastes, and extremely good too. This was the launch pad for the new Cardas Clear Beyond XL power cord, but the full system (with Jeff Rowland Daemon, Joseph Audio Pearl 3 loudspeakers, Mara Tape Machine with Doshi Audio tape stage, Aurender N10 server and lots of Cardas Clear Beyond) sounded just so much fun it was hard to drag yourself away. And also, anyone who has the stones to play a Shpongle track at an audio show deserves praise.


Read Next From Blog

See all
Enjoy the Sponsors T.H.E. Show 2022 Media & Exhibitor Celebration 

Enjoy the Sponsors T.H.E. Show 2022 Media & Exhibitor Celebration 

From the press release (May 24, 2022) Enjoy the […]

photo by Frederick Helwig

Music Interview: Super Furry Animals

It’s been 20 years since psychedelic Welsh wizards Super Furry […]

Renaissance Moon


Taking the guesswork out of buying new speakers, the new Moon Voice 22

Music Interview: Matt Berry

Music Interview: Matt Berry

Sean Hannam speaks to Acid Jazz artist (and occasional gothic British vampire) Matt Berry about his recent five-LP retrospective, Gather Up.

Sign Up To Our Newsletter