Pro-Ject 2 Xperience SB Turntable Announced

Based on the same basic plinth design as its predecessor, the 2 Xperience SB is available in four stunning finishes – Piano Black, Olive (shown), Walnut and Mahogany. It also utilises the same proven vinyl-topped sandwich platter to ensure a completely stable and reliable platform on which to place your records. Where the 2 Xperience SB is elevated to a new performance level is with the addition of a new motor, new automatic speed control and new tonearm.

The new precision motor is driven by an efficient DC power supply and regulated by a built-in electronic speed changer. So not only does the neatly integrated speed control offer easy switching between 331/3 and 45RPM, but it also acts as an AC generator for the motor to ensure a clean and stable power signal. The pre-installed 9CC Evolution tonearm has been proven by other Pro-Ject turntables – such as the EISA award winning Xtension 9 SuperPack – to offer an unrivalled performance for the cost. Benefiting from a light-weight one-piece carbon fibre tube that’s mounted inside a heavy assembly, which draws vibrations away from the signal wires, and finished with a sorbothane-damped counterweight; it typifies the audiophile characteristics of the whole turntable.

The turntable is supplied with an Ortofon 2M Silver cartridge pre-fitted. Based on the iconic 2M Red design, this special version found only on Pro-Ject turntables benefits from silver voice coils in the generator system to produce a clean, musical performance. An acrylic dust cover, screw-on record clamp and expertly engineered coned feet finish off the package. The 2 Xperience SB is a record player with the convenience of an affordable design but the sound characteristics of a high-end vinyl spinner.

The 2 Xperience SB will be shown in the UK for the first time at Bristol Sound & Vision Show, 2015. Visit us in Room 418 to get a first-look.

SRP £1,050.00

The Pro-Ject 2 Xperience SB will be available in the UK from March 2015.

Technical Information

Speed: 33 / 45 RPM (electronic speed change)

Drive Principle: Belt drive

Platter: 300mm MDF with vinyl top

Mains Bearing: Stainless steel

Wow & Flutter: ± 0.08%

Speed Drift: ± 0.5%

Signal-to-Noise Ratio: -70dB

Tonearm: 9” 9CC Evolution (carbon fibre)

Effective Arm Length: 230mm

Effective Arm Mass: 8.5g

Overhang: 18mm

Tracking Force: 10 – 30mN

Included Accessories: Dust Cover, Record Clamp

Power Supply: 15V / 800mA DC

Power Consumption: 4W Max. / <0.5W in standby

Dimensions (W x H x D): 460 x 160 x 360mm (dust cover closed)

Weight: 7.7kg